Which Flag State has approved Admiralty Total Tide as covering the carriage requirement?

Please see the Flag State Approval table for this product.

From the TotalTide toolbar select File – Start-Up Key Wizard, this will allow you to request a Permanent Key. You must first select the Next box. This will take you to the TotalTide Start-Up Key Wizard – What Next? screen. Select the box marked I would like to obtain my Permanent Key by email, then select Next. Insert a Computer Name or choose a name from the drop-down list and select Next then select Finish.

This will generate an email which is addressed to TotalTide@ukho.gov.uk. In the subject line there will be a string of letters and numbers beginning with UKHOPKR…… Do not amend any of this at all. Just click on the Send button. You will receive an email back with details of your Permanent Key.

To install the Permanent Key choose the option I have a Permanent Key and enter the key details. A useful tip is to always use Copy and Paste (Ctrl&C/Ctrl&V) when entering key details.

You can choose the option I would like to print my Permanent Key request or I would like to save my Permanent Key to a floppy disc. You can then manually type your Permanent Key request into the subject line of an email on another PC and send it to TotalTide@ukho.gov.uk or copy and paste it from a floppy disc into the subject line of an email and send it. The Permanent Key will be returned to the email address that sent in the Permanent Key Request. Alternatively you can send the Permanent Key request details to your Distributor.

To install the Permanent Key choose the option I have a Permanent Key and enter the key details. Please note that if you type the Key manually, you must take care to enter the Key exactly as shown in order for the request to be successful.

Load the latest version of TotalTide on your back up PC using the original Start-Up Key and generate a Permanent Key request from this machine, ensuring that a different computer name has been selected.

Note that if the Start-Up Key was issued for a previous version of TotalTide, when the program is run initially this will generate an error that the program cannot read Area Data Files 000x_0y (where “x” is the Version number and “y” is the Area number). This error should be ignored; the Permanent Key should be requested as shown above and installed. It will then be necessary to load the current Areas using the TotalTide toolbar and selecting View – Options – Areas.

If Area Data Sets from older versions of TotalTide are still licensed, it will be necessary to copy these Area Data Sets from the original CDs. These files can be dragged and dropped from the original CD (located in the AreaData folder) to the current program folder (default folder is C:\Program File\TotalTide).
It will then be necessary to load the Areas using the TotalTide toolbar and selecting View – Options – Areas.

You will need to get your existing Permanent Key revoked at the UKHO before installing TotalTide on a replacement PC. Either contact your Distributor or send an email to the UKHO Helpdesk – helpdesk@ukho.gov.uk explaining the situation and enclosing either your Start-Up Key, Permanent Key, Update Key or User Permit and Computer Name.

When the original Key has been revoked, load the latest version of TotalTide on your replacement PC using the original Start-Up Key and generate a Permanent Key request from this machine. Note that if the Start-Up Key was issued for a previous version of TotalTide, when the program is run initially this will generate an error that the program cannot read Area Data Files 000x_0y (where “x” is the Version number and “y” is the Area number). This error should be ignored, the Permanent Key should be requested as shown above and installed. It will then be necessary to load the current Areas using the TotalTide toolbar and selecting View – Options – Areas.

If Area Data Sets from older versions of TotalTide are still licensed, it will be necessary to copy these Area Data Sets from the original CDs. These files can be dragged and dropped from the original CD (located in the Area Data folder) to the current program folder (default folder is C:\Program File\TotalTide).
It will then be necessary to load the Areas using the TotalTide toolbar and selecting View – Options – Areas.

When you generate a Permanent Key Request this captures hardware details about the host PC which locks the Permanent Key to the PC. If you have made any changes to your hardware or changed your PC since the generation of your Permanent Key request, this will invalidate your Permanent Key. Contact the UKHO Helpdesk at helpdesk@ukho.gov.uk for assistance.

If you are running a MAIN and a BACK UP system, ensure that the correct key is used on the correct PC.

Note: With effect from the 2005 version of Totaltide which is now annualised (ie it has a 12 month licence), there is no facility to use previously purchased Area Data sets with the latest version.

Also the Area data sets have been re-named to reflect the same numbers used within ARCS and ADLL as follows:

To upgrade to the latest annualised version, you need to give your Admiralty Distributor your User Permit number and they will arrange this for you. On either your MAIN or BACK UP system go to the TotalTide toolbar, select File – Update Key Wizard, select Purchase a key to enable more areas or to update existing areas and select Next to view. This displays your User Permit with the option to print or save to floppy disc. Your Agent will also need to know which Area Data Sets you require. They will send in a request for an Update Key for you, and you will receive a new CD ROM together with your Update Key(s). Note that separate keys will automatically be supplied for both the MAIN and the BACK UP systems.

To install the upgrade, insert the CD and select to un-install the previous version. When asked to insert the licence key, insert the new Update Key(s). A useful tip is to always use Copy and Paste (Ctrl&C/Ctrl&V) when inserting Keys.

Each Area Data Set file costs £58.00.

Check that your Area Data files have been loaded. Go to the TotalTide toolbar and select View – Options – Areas. All areas you are licensed to use should be shown with a green tick. If there is a red cross against any of them, simply left-click on the area, select the green tick then select Apply. The licensed areas should then be loaded.

Check the folder C:\Program Files\TotalTide to see if the Area Data Sets are present. If they are missing they can be copied (dragged and dropped) from the original CD - they are located in the AreaData folder on the original CD. It will then be necessary to load the Areas using the TotalTide toolbar and selecting View – Options – Areas.

This problem occurs with some users of pre-2004 TotalTide editions and is a Windows Installer problem. It happens when the end user opens multiple copies of the application in quick succession. To remedy this delete the folder that contains the world map ('c:\program files\common files\chersoft\worldmap' by default) and then run TotalTide. The application should detect that the World Map is missing and will reinstall just that component automatically. Alternatively the program can be uninstalled and reinstalled.

This problem occurs when the List View has been removed. To insert a new List View select Windows – New List from the TotalTide toolbar.

This problem occurs when these Views have been removed. To insert new Views select Windows – New List or New Filter from the TotalTide toolbar.

Ensure that a Permanent Key has been requested and installed otherwise you will only be able to access the Start-Up Key Wizard.

If the Permanent Key has been installed the program may not have been closed since the Key was installed. Close the program and re-run it.